Interlogix DVR 42 User Manual - Manual (Page 38)

36 TruVision DVR 42 User Manual
Note: When the monitor B is active, the main monitor commands are
unavailable.
Table 7: Mouse menu for monitor B (spot monitor)
Item Name Description
1. Single camera Switch to a full-screen view for the selected camera from
the dropdown list.
2. Multi camera Switch between the different multiview options from the
dropdown list.
3. Previous screen In single-camera mode, display the previous camera. In
multi-camera mode, display the previous screen cameras.
4. Next screen In single-camera mode, display the next camera. In multi-
camera mode, display the next screen cameras.
5. All-day playback Playback the recorded video of the selected day from
selected cameras. See “Previous-day playback” on page 58
for more information.
6. Monitor A Switch between monitors A (main) and B (spot).
Multiview format
The DVR has full screen display format as well as five multiview formats.
Viewing in full screen
Press the numeric button on the front panel to switch to the corresponding
camera display. For example, press button 10 to view camera 10.
Right-click the mouse and select Single Camera from the menu. Select the
camera required from the list.
Viewing in multiview
A video tile is any cell in a multiview display. A camera image can only be shown
in one video tile at a time. The TVR 42 has five multiview display formats
available as well as full screen. See Figure 13 below.
To change the multiview display that appears by default, go to the Display menu.
See “Changing the camera sequence” on page 41 for more information.