Interlogix DVR 42 User Manual - Manual (Page 54)

52 TruVision DVR 42 User Manual
6. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. From the preset list, select a tour number and click to delete the selected
the preset tour.
– Or –
In the preset tour toolbar, click to delete all the preset tours for the
selected tour.
3. Click Back to return to live view.
To call up a preset tour:
• PTZ control panel:
1. In live view left-click the mouse and select the PTZ control icon in the quick
access toolbar. The PTZ control panel appears. Select the desired camera
from the toolbar.
– Or –
On the front panel, select the desired camera and press Enter on the joystick
to call up the quick access toolbar. The PTZ control panel appears.
2. Scroll the toolbar to Tour and double-click the desired preset tour from the
list. The camera immediately carries out the preset tour movement.
• Menu toolbar:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. Select the desired preset tour from the list and click to start the shadow
tour. Click to stop the preset tour.
3. Click Back to return to live view.
Setting and calling up a shadow tour
The shadow tour command remembers the manually-controlled PTZ dome
camera movement track. One shadow tour can be set up.
Note: The PTZ dome camera used must be able to support a shadow tour
command. See Appendix F on page 158 for the complete list of PTZ commands
available by camera protocol.
To set up a shadow tour:
1. From the menu toolbar, click PTZ Settings > More Settings .
2. Select the shadow tour from the list.