Interlogix DVR 42 User Manual - Manual (Page 33)

TruVision DVR 42 User Manual 31
Icon Name Description
Camera management Configures camera settings including OSD display, motion
detection, video image adjustments, camera title, privacy
mask, tamper-proof, video loss, coverts camera, and copy
settings to other cameras. See Chapter 14 “Camera
settings” on page 128.
Video schedule Configures recording settings including recording
schedules, record quality, auto delete mode, manual record,
overwrite, v-stream encoding, auto archive, and recording
mode. See Chapter 10 “Recording” on page 89.
Network settings Configures standard network settings including IP address,
e-mail notifications, DDNS setup, and advanced network
settings. See Chapter 12 “Network settings” on page 111.
Alarm settings Configures alarm settings including alarm input, relay
output, video loss, remote alert, pre-alarm and post-alarm
seconds, and buzzer time. See Chapter 11 “Alarm settings”
on page 100.
PTZ settings Configures PTZ settings. See Chapter 6 “Controlling a PTZ
camera” on page 47.
User management Configures users, passwords, and access privileges. See
Chapter 16 “User management” on page 139.
System settings Configures system settings including system date and time,
audio output, device name, RS-485 settings, RS-232
settings, firmware upgrade, hard drive settings, boot log,
default settings, import/export configuration file, and
shutdown. See Chapter 13 “HDD management” on page
121 and Chapter 15 “DVR management” on page 132.
Help information Provides reference information to the various toolbars,
menus, and keys within the interface.
Power manager Provides access to logout, reboot and shutdown options.
See “Turning on and off the DVR” on page 19.
To access the main menu:
1. In live view, press the Menu button on the remote control or front panel.
- Or -
Right-click the mouse and select Menu from the pop-up menu.
The main menu window appears. The Display window appears by default.
2. Click the required menu icon to display its submenu options. Modify the
configuration parameters as required.
3. Click Apply to save the settings.