Interlogix DVR 42 User Manual - Manual (Page 41)

TruVision DVR 42 User Manual 39
Digital zoom
You can easily zoom in or out of a camera image in live view and playback using
the digital zoom command. The zoom command magnifies the camera image
four times. See Figure 15 below.
Figure 15: Digital zoom window
To quickly zoom in/out on a camera image:
1. Left-click the mouse on the desired camera. The quick access toolbar
appears.
2. Left-click the mouse and select the digital zoom icon, or on the front panel
press the Zoom+ button. The digital view window appears.
3. Left-click the mouse and drag the red square to the area of interest, or move
the joystick on the front panel to position the red square. The selected area is
magnified.
4. To exit digital zoom, right-click the mouse or press the Zoom— button on the
front panel.
Configuring live view
The setup of live view can be modified from the main menu to suit different
needs, such as the different monitors, multiview layout, and dwell time options.
You can also enable audio output.
In the Layout menu use the Video Output Interface, Live View Mode, Dwell Time,
and Enable Audio Output settings to configure the main monitor. Use Event
Output as well as Event and Alarm Full Screen Monitoring Dwell Time settings to
configure the spot monitor.