Interlogix DVR 42 User Manual - Manual (Page 109)

TruVision DVR 42 User Manual 107
8. Select the PTZ camera function required in response to an external alarm.
Click the PTZ Linking tab and select the PTZ camera as well as the preset,
preset tour or shadow tour that is triggered when the alarm is detected.
Click Apply to save the settings. Click Copy to copy the settings to other
cameras, if required.
9. Click OK to return to the alarm input window.
10. Click Back to return to live view.
To set up an alarm output:
1. From the menu toolbar, click Alarm Settings > Alarm Output .
2. Select the alarm output.
3. Select a timeout option.
The timeout setting lets you define how long a signal remains active after the
alarm has ended. If you select
Manually Clear , the signal remains active until
it is manually acknowledged by pressing the alarm button on the front panel
or remote control (see “Triggering or clearing alarm outputs manually” on
page 108).
4. Select the recording schedules for the alarm output.