Interlogix DVR 42 User Manual - Manual (Page 108)

106 TruVision DVR 42 User Manual
To trigger the front panel alarm LED:
1. Click the Display Settings icon in the menu toolbar and select
Monitor>More Settings .
2. Check both the Other Notification: Panel Alarm LED and Motion Alarm
boxes.
Setting up external alarms
The DVR can be configured to record when an alarm is triggered by an external
alarm device (for example, PIR detector, dry contacts…).
To set up external alarms:
1. From the menu toolbar, click Alarm Settings > Alarm Input .
2. Select the alarm input number of a camera, and enter the input name, if
required.
3. Select the alarm input type, NO or NC.
4. Check the Enable Alarm Input box to enable the function. Click Rule to set
up the rules for the cameras to be triggered, their alarm schedules, method of
alarm notification and PTZ function.
5. Select the cameras to be triggered when an external alarm is detected.
In the Rule window, click Trigger channel and select the cameras to be
triggered for recording when an alarm is detected. Only analog cameras can
be selected. Click
Apply to save the settings.
6. Select the recording schedules for the external alarm.
Click the Arming schedule tab and select the day of the week and the time
periods during the day when motion can be recorded. You can schedule up to
eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click Copy to copy the settings to other
days of the week and holiday period.
Note: The time periods defined cannot overlap.
7. Select the response method to an external alarm.
Click the Rule tab to define the method by which you want the DVR to notify
you of the alarm. Click Apply to save settings .