Interlogix DVR 42 User Manual - Manual (Page 116)

114 TruVision DVR 42 User Manual
• DynDNS: Enter the server address for DynDNS (i.e.
members.dyndns.org). In the DVR domain name field, enter the domain
obtained from the DynDNS web site. Then enter the user name and
password registered in the DynDNS network.
4. Click Apply to save the settings.
5. Click Back to return to live view or to continue to configure.
Configuring an NTP server
A Network Time Protocol (NTP) server can also be configured on your DVR to
keep the date and time current and accurate.
Note: If the device is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44) or europe.ntp.pool.org. If the
device is setup in a more customized network, NTP software can be used to
establish a NTP server used for time synchronization
To set up an NTP server:
1. From the menu toolbar, click Network Settings > NTP .
2. Check the NTP box to enable feature. It is enabled by default.
3. Enter the NTP settings:
• Interval: Time in minutes to synchronize with the NTP server. The value
can be between 1 and 10080 minutes. Default is 60 minutes.
• NTP server: IP address of the NTP server.
• NTP port: Port of the NTP server.
4. Click Apply to save the settings.
5. Click Back to return to live view or to continue to configure.
Configuring e-mail
Your DVR can send e-mail notifications of alarms or notifications through the
network. The e-mail includes an HTML link. Click the link to play the video file
showing the alarm or notification.
Note: Ensure that the DNS address has been set up correctly beforehand.
To configure e-mail settings:
1. From the menu toolbar, click Network Settings > E-mail .
2. Enter the required settings.