Interlogix DVR 42 User Manual - Manual (Page 79)

TruVision DVR 42 User Manual 77
Figure 31: Remote browser configuration (Device Parameters – Device Information window
shown)
Table 16: Description of remote configuration menus
Menu Function Description
Device
Parameters Device Information Device name: Define the DVR name. The default
name is TVR 42.
Device number: The device number to use for
the DVR when programming the remote control.
The default value is 255.
Zone ID: Each DVR in a daisy chain must have a
unique zone ID so that it can be controlled by a
KTD-405. The default value is 1.
Overwrite: Enable or disable. Enabling this
setting causes recorded files to be overwritten
once the HDD is full.
eSATA: Define how an external recording device
saves records. See “Using an external recording
device” on page 92 for more information.
Event priority: Define the priority between text
insertion event and motion alarm if both are
triggered at the same time. Default is Motion
alarm (Text In < Motion).
Time Settings Define time and date. See “Configuring time and
date” on page 42 for more information. See
““Configuring an NTP server” on page 114 for
information on setting up NTP time settings.
Holiday Settings Define when recordings occur during holiday
periods. See “Holiday schedules” on page 95 for
more information.
Camera Settings Display Settings Define which information is displayed on-screen.
See “Configuring the camera OSD settings” on
page 128 for more information.
Video Settings Define general recording settings. See “Defining
a recording schedule” on page 93 for more
information.