beautypg.com

Interlogix DVR 42 User Manual User Manual

Page 80

background image

78

TruVision DVR 42 User Manual

Menu

Function

Description

Recording Schedule

Define the recording schedules. See “Defining a
recording schedule” on page 93 for more
information.

Motion Detection

Define motion detection parameters. See “Setting
up motion detection” on page 103 for more
information.

Privacy Mask

Define the on-screen privacy mask areas. See
“Setting up privacy masking” on page 129 for
more information.

Tamper-proof

Define the video tampering detection settings.
See “Detecting video tampering” on page 110 for
more information.

Video Loss

Define the video loss detection settings. See
“Detecting video loss” on page 109 for more
information.

Text Overlay

Add extra lines of text on screen. See “Text
overlay” on page 86.

Image

Adjust image quality on screen. See “Adjusting
camera image settings” on page 130 for more
information.

Covert Camera

Define the cameras whose images cannot be
displayed by those not logged in. See “Hiding a
camera image from view” on page 130” on page
130 for more information.

Capture Settings

Define the resolution and image quality of
snapshots.

Manual Record

Define which cameras can manually record. See
“Manual recording” on page 95 for more
information.

Network Settings

General

Define the general network settings. See
“Configuring general network settings” on page
111 for more information.

PPPOE

Define the PPPoE settings. See “Configuring
PPPoE” on page 112 for more information.

DDNS

Define the DDNS settings. See “Configuring
DDNS” on page 113 for more information.

Email

Define the settings to send an e-mail. See
“Configuring e-mail” on page 114 for more
information.

Network Storage

Define the remote storage system for DVR
recordings. See “Using a network storage
system” on page 87 for more information.

UPnP

Enable this function so that the DVR can
automatically configure its own port forwarding.
See “Configuring UPnP” on page 115 for more
information.

SNMP

Define the SNMP settings. See “Configuring
SNMP” on page 116 for more information.