Interlogix DVR 42 User Manual - Manual (Page 135)

TruVision DVR 42 User Manual 133
Updating system firmware
The firmware on the DVR can be updated using five methods:
 Via an USB device
 Over the network via an FTP server
 Via the DVR web browser
 Using TruVision Navigator. For further information, refer to the TruVision
Navigator user manual
 Via an optical drive
The firmware upgrade file is labeled TVR42.dav.
To update the system firmware using a USB device:
1. Download on to a USB the latest firmware from our web site at:
www.gesecurityproducts.eu/videoupgrades
- Or -
www.utcfssecurityproductspages.eu/videoupgrades
2. Connect the USB device to the DVR.
3. Click the System Settings icon in the menu toolbar.
4. Select Upgrade > Local Upgrade . The list of files on the USB is displayed.
5. Select the file and click Upgrade . Click Yes to begin the upgrade process.
6. When the upgrade process is completed, the recorder will reboot
automatically.
To update the system firmware via the web browser:
1. Click the Configuration tab in the browser toolbar and then select
Maintenance .
2. For the latest firmware from our web site, download the file at:
http://www.interlogix.com/library
- Or -
www.utcfssecurityproductspages.eu/videoupgrades
3. Click Upgrade .
Note: The upgrade process may take a few minutes. The system will
automatically reboot once the upgrade is completed.
To update the system firmware via a FTP server:
For engineering purposes only.