Kenmore 385. 19000 User Manual

Page 90

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

• Threading the Machine

For threading, refer to the description of conventional

sewing (see page 16 ).

Pass the needle thread through the hole in the

Embroidery Foot P in a downward direction.

Guide the thread around the thread holder from the

front side. (Leave 2 to 3 cm [1" J hanging.)

Thread holder

d) Needle thread

(3) Bobbin thread

• To Attach the Embroidery Hoop to the Machine

Turn the knob so it is parallel with the hoop, and set it

on the carriage.

Attach the outer hoop by fitting the prongs into the

carriage, and turning the knob clockwise.

(T) Knob

(

) Carriage