Kenmore 385. 19000 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A setting reminder message is displayed for three
seconds. Suitable thread tension level is indicated.
Adjust the top thread tension by turning the
thread tension dial, if necessary. Make sure that the
feed dogs are in the lowered position.
Attach the embroidery foot P.
(J) Thread tension dial
To drop the feed dogs, push the lever in the
direction of the arrow as illustrated (Z)-
To raise the feed dogs, push the lever in the
direction of the arrow as illustrated ® .
Alphabet (block style or script style) can be
selected.
The clothsetter key I 0 I is for using the
clothsettcr (optional accessory).
Press the menu key to return to the menu screen.
(D Clothsetter Key : |
(D Raised position
(Z) Lowered position
0
To Attach Etnbroidety Foot P
Raise the presscr foot lifter, loosen the screw and
remove the foot holder ,
Attach Embroidery Foot P and securely tighten
the screw with the screwdriver.
Set the pressure dial at “2”.
Note;
After the completion of sewing, return
the pressure dial back to position “3”.