Corded buttonhole, Iii f id, Cd spur – Kenmore 385. 19000 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Corded Buttonhole

♦ Use the same procedure as #12 square buttonhole,

(see page 44)

* Set the stitch width to match the thickness of the

cord used.

With the buttonhole foot raised, hook the filler

cord on the spur at the back of the buttonhole foot.

Bring the ends toward you under the buttonhole

foot, clearing the front end.

Hook the filler cord into the forks on the front of

automatic buttonhole foot R to hold them tight.

Lower the needle into the garment where the

buttonhole will start and lower the foot.

Depress the foot control gently and sew the

buttonhole. Each side of the buttonhole and the

barracks will be .sewn over the cord.

Remove the fabric from the machine and cut the

sewing threads only.

Tension

d) R: BH foot

CD Spur

(D Needle thread

Bobb in thread

♦ Pull the left end of the filler cord to tighten it.

Thread the end through a darning needle.

Draw to the wrong side of the fabric and cut.

* To cut the buttonhole opening, refer to the

instructions on page 46.

■d)

i___ /

3__

III

f Id

\ c

III