Section iv professional style embroidery, The illustration shows various starting points, Getting ready to sew professional style embroidery – Kenmore 385. 19000 User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION IV PROFESSIONAL STYLE EMBROIDERY
Getting Ready to Sew Professional Style
Embroidery
• Stabilizer
Stabilizer for embroidery is available in a variety of
types and weights.
Stabilizer should be attached to the wrong side of
fabric. (Mote than one layer may be required.)
The non-adhesive stabilizer should be used with fabric
which cannot be ironed or on sections which are
difficult to iron. For both types, cut the stabilizer larger
than the embroidery frame and set it on the frame so
that the entire piece is fastened in it.
Selection of stabilizer:
To obtain perfectly formed letters, it is important to
use the correct stabilizer:
■■ Use for stretch
fabric, thin fabric
and shrinkable
fabric.
■■ Use for firm
fabrics and fabrics
which cannot be
ironed.
Note:
In embroidery sewing, the foot control is not used.
Use the start/stop button.
' Selecting Needle and Thread
* Adhesive type (iron-on) -
Non-adhesive type
WEIGHT
OF
FABRIC
TYPE
OF
THREAD
TYPE
OF
NEEDLE
NEEDLE^
SIZE
L^ht
Medium
Size 50
Machine
Embroidery
Thread
Universal
Ball Point
Blue Needle
11(75)
Heavy
V
Size 50 to
100
Synthetic
Universal
14 (90)
У
* For embroidery sewing, we recommend good quality
machine embroidery thread.
• Template
The illustration shows various starting points.
(D Starting point for optional Memory Cards K-lctc.
(
2
) Starting point for optional Memory Cards K-101,
102
etc.
(f) Starting point for Monogramming (see page 72).
(T) Thumb hole (see page 72).