beautypg.com

Kenmore 385. 19000 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

* To attach the stabilizer

Place the glue (shiny) side of the stabilizer on

the fabric and iron as illustrated using medium

temperature.

® Stabilizer

®

Fabric

♦ To set the Fabric in the Embroidery Hoop

Mark the desired embroidering position on the

fabric as illustrated using tailors chalk.

(3) Fabric

(J) Reference lines

Place the template on the fabric, matching the

reference lines located on the template to the

reference lines you previously marked on the

fabric.

Tape the template to the fabric as shown to hold

the template in place. (Transparent tape is

recommended.)

(S) Tape

(D

Template

Place the fabric with the template attached to it

on top of the outer hoop.

Set the inner hoop on top of the fabric.

(Z)

Inner hoop

® Right side of fabric

CD Stabilizer on wrong side of fabric

® Outer hoop

Push the flat side of the inner hoop “ A ” into the

flat side of the outer hoop “ B

While squeezing the handles “ C ” together push

the round part of the inner hoop into the round

part of the outer hoop so the material is secure.

Remove the template by putting your finger in

the thumb hole located on the template and lift

up.

® For easy removal of template (thumb hole)

72