Blind stitch hemming qj – Kenmore 385. 19000 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Choose Stitch Pattern 7 and attach Foot G.
'iT) G; Blind hem foot
7
Blind Stitch Hemming QJ
On heavyweight fabrics that ravel, the raw edge
should be overcast first.
Then fold the hem as illustrated.
(
2
) Wrong side of fabric
0.4-0.7cm{l/4-7/16")
(J) Light weight fabric
@ Heavy weight fabric
To sew;
♦ Position the fabric on the rnachine so that the
needle just pierces the folded part of the fabric
when the needle comes over to the extreme left
side. Lower the presset foot.
@ When the needle comes to the left
(
7
) When the needle comes to the right
♦ Sew, guiding the folded edge along the guide.
For a professional looking hem, fold the fabric
reducing the width to about
0.2
cm (
1
/
8
").
As you sew, the right hand stitch will fall off the
fabric edge forming a chain stitch.
(8) Guide
• Changing Needle Position
Turn the sliding guide screw so that the sliding guide is
very close
0.1
cm (l/l
6
")to the left side of the blind
hem foot.
Needle
Guide screw
Sliding guide
©
Most left needle position
©
Most right needle position
56