Embroidery with memory cards, 2 cm (1/8 '') – Kenmore 385. 19000 User Manual
Page 106
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Embroidery with Memory Cards
♦ To Insert the Memory Card
♦
Turn off the power switch.
♦
Insert the card making sure the
4
mark on the
label is facing you,
♦
Push the card straight in until it clicks (see
illustration).
♦
Turn on the power switch. The menu screen
appears.
♦
Select the pattern by pressing the |Q i| key.
® ON
@ OFF
(D
Memory card sticks out about
0.2 cm (1/8 '')
when it is inserted correctly.
(3) Settings reminder message is displayed for
about 3 seconds.
• To Eject the Memory Card
Turn off the power switch.
Upon pressing the card eject button, the memory card
comes out halfway and can be taken out.
®
ON
@ OFF
(3) No memory card is inserted and the eject
button is not sticking out,
(4) Memory card is incorrectly inserted.
If the eject button is not sticking out, the
memory card is not pushed in far enough.