Kenmore 385. 19000 - Manual (Page 121)

r
Problem
Type of
Sewing
Cause
A
Reference
Visual touch All (T) The sharpness of visual touch screen is not Sec page 2,
screen is not adjusted properly. Turn the knob to
clear. correct.
The Embroidery (T) The memory card is not inserted properly. See page 90.
embroidery key
does not work.
Keys do not
Embroidery (T) The needle is in the lowered position. See pages 20, 86.
work. Raise the needle.
Conventional (T) The prcsser foot pressure is not correctly See page 20.
Slipping fabric
Conventional
adjusted.
( 2 ) The correct presser foot ¡s not being used. See page 6.
Conventional (T) The feed dogs are packed with lint. See page 100.
Convenrional ( 2 ) The presser foot pressure is too weak. Sec page 20,
The cloth is
Conventionai @ The stitches are too fine. Make the stitches
not feeding
coarser.
smoothly. Conventional ( 4 ) The fabric is not fed when sewing is starting. See page 98,
Convenrional @ The feed dogs are lowered. See page 70.
Conventional (B) The correct presser foot is not used. See page 6.
The automatic
Conventional (T) The stitch length is not suitable for the fabric See page 34.
buttonhole being sewn.
stitches are Convenrional (2) Stabilizer is not used with stretch fabrics. See page 40.
not balanced.
Convenrional ( 3 ) The presser foot is incorrect. See page 6.
All (T) The bobbin winder spindle is in the winding See page 12.
position.
All ( 2 ) The number of characters is beyond the See page 82.
Pattern capacity of the memory.
selection keys MonD^pHIItDrg ( 3 ) The control circuit is not working correctly. Turn off the machine
do not work. and mm it on again.
Then set for desired
pattern.
All (J) Conventional sewing or embroidery modes See pages 68-74.
have not been selected properly.
V ____________________ )
105