Zipper sewing q, Zipper sewing – Kenmore 385. 19000 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Zipper Sewing Q
Choose Stitch Pattern 1 and attach Foot E.
(D E; Zipper foot
• To Snap On the Zipper Foot
Fit the pin on the zipper foot into the groove on the
foot hoider.
*
Fo sew the left side of the zipper, attach the zipper
foot with the right side of the pin locked to the
foot holder.
*
To sew the right side
of
the zipper, attach the
zipper foot with the left side of the pin locked to
the foot holder.
(D Groove
(3) Pin
® When the left side is sewn.
CD When the right side is sewn.
• Fabric Preparation
Add 1 cm (3/8 ') to the zipper size. This is the overall
opening size.
CD
Right side of fabric
(D End of opening
(2) Opening size
® Slider
(D
Zipper size
(Z) Zipper teeth
@ I cm (3/8")
® Zipper tape
Place right sides of fabric together and sew to the end of
the zipper opening. Reverse stitch to iock the stitches.
Manually increase the stitch length to 4.5 and set the
needle tension
at
0
, and sew the zipper opening.
(9) 4.5(Basting Stitch)
@ End of opening
@ Reverse stitch
@ Straight Stitch
® 2 cm (3/4")
• To Sew
♦
Fold back the left seam allowance. Turn under the
right seam allowance to form a
0.2
to
0.3
cm {
1/8
")
fold. Place the zipper teeth next to this fold and
pin in place.
Attach the zipper foot with the pin on the right
hand side.
Lower the zipper foot on the top side at the bottom
of the zipper so that the needle pierces the fabric
next to the fold and the zipper tape.
(D Fold
(D Opening size
@ 0.3 cm (1/8")
(D Lower fabric
d) Stitch line
(J) Wrong side of fabric
(4) End of opening