Note – Kenmore 385. 19000 User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Three Stitches for Overcasting

• Zigzag Stitch 12

This stitch can be used on most fabrics, it is the fastest

way CO finish an edge, leaving it neat and flat. A dense

zigzag can also be used for applique.

(T) C: C^veredge foot

Note:

Do not set the zigzag width to less than 5

manually when using the overedge foot.

• Multiple Zigzag Stitch

This stitch is used to finish the seam allowance on

synthetics and other fabrics that tend to pucker.

The stitch is excellent for darning and mending tears.

A; Zigzag foot

• Overcasting

This stitch can be used to simultaneously stitch and

overcast seams in one step.

Use this stitch when you do not need to press seams open

flat.

Test stitch on the fabric being used for best results.

* Gently guide the fabric so that the raw edges always

touch the black ridge and brush guide.

C; Overedge foot

(2) Black ridge and brush guide

Edge

of febric

Note:

Do not set the zigzag width to less than 5

manually when using the overedge foot.