Kenmore 385. 19000 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If the button is extremely thick, make a test buttonhole.
If it is difficult to fit the button through the test
buttonhole, lengtiien by pulling the button holder on
the foot back to increase length.
CD
Gap
Sensor Buttonholes, cont'd
• To Alter Buttonhole Stitch Width and Density
♦
Press the |
t
| j key.
♦ The pre-programmed stitch settings are shown on
the screen.
CD
Narrow
(D
Wide
d) Dense
(4) Coarse
Return Key t |
|
♦ Press the |
| key to return to the previous screen.
Press the
\ ^ \
key again to return to the main
menu.
48