AERCO ProtoNode Gateway Rev 3 (with external LEDs) - Manual (Page 25)

AERCO ProtoNode Gateway
User Manual
OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 25 of 126
GF-129 Ph.: 800-526-0288 11/06/2014
4.4 Commissioning ProtoNode LER on a LonWorks Network
Commissioning may only be performed by the LonWorks administrator. The User
will be prompted by the LonWorks Administrator to hit the Service Pin on the ProtoNode
LER at the correct step of the Commissioning process which is different for each
LonWorks Network Management Tool.
If an XIF file is required, see steps in Section 4.5.
Figure 4-5: LonWorks Service Pin Location
4.5 Instructions to Upload XIF File from ProtoNode LER Using FS GUI
Web Server
• Connect a standard cat5 Ethernet cable between the PC and ProtoNode
• The Default IP Address of ProtoNode is 192.168.1.24, Subnet Mask is
255.255.255.0. If the PC and ProtoNode are on different IP Networks, assign a static
IP Address to the PC on the 192.168.1.xxx network
• For Windows XP:
Go to > >
Right-click on Local Area Connection > Properties
Highlight >
• For Windows 7:
Go to > >
> >
Right-click on Local Area Connection > Properties
Highlight >