AERCO ProtoNode Gateway Rev 3 (with external LEDs) - Manual (Page 13)

AERCO ProtoNode Gateway
User Manual
OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 13 of 126
GF-129 Ph.: 800-526-0288 11/06/2014
2.4.5.2 ProtoNode RER S0–S3 and A1-A8 DIP Switch Locations
The S-Bank DIP switches are accessible with the top cover in place. However, the cover
must be removed to access the additional MINI DIP switches A1 through A8. To remove
the cover, pull it from the unit while holding onto the 6 pin Phoenix connector.
Figure 2-5: Location of DIP Switches S0 – S3 and A1-A8
“A” Bank DIP
Switches
(A0- A7)
IMPORTANT!
Do not hold the wall
mount tabs when
removing the cover
as these are
designed to break off
if not required!
“S” Bank DIP
Switches
(S0- S3)
ON
OFF
ON OFF
Mini DIP Switches