AERCO ProtoNode Gateway Rev 3 (with external LEDs) - Manual (Page 16)

AERCO ProtoNode Gateway
User Manual
Page 16 of 126 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 OMM-0080_0H
11/06/2014 Ph.: 800-526-0288 GF-129
3.2 ProtoNode LER Showing Connection Ports and Features
Figure 3-2: ProtoNode LER Internal Components
Power LED
Unused LEDs
Jumper – DO NOT MOVE
Field Port
LonWorks Connector
RS-485
+ _ GND
Power
• 9-30 VDC
• 12-24 VAC
“A” Bank: Node ID
or MAC Address
“B” Bank: Baud Rate
Run LED
“S” Bank: Protocol &
Configuration Files
RS-485 Bias Jumpers
RTC LED
RUN LED
ERR LED
RX LED
TX LED
Power LED
RS-485 Termination Jumper
LonWorks Service Pin
LonWorks LED
IMPORTANT!
Do not hold the wall
mount tabs when
removing the cover
as these are
designed to break off
if not required!
ProtoNode
LER
6-Pin Connector – RS-485 Modbus and Power
LonWorks TX LED LonWorks RX
Mini DIP Switches
Host Port
6-Pin Connector
Recovery Button (Not Used)