AERCO Belimo Motorized Valves Installation User Manual
Technical instructions, Belimo motorized valve installation
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, New York 10913 • Phone: 800-526-0288
TID-0028_0C
TECHNICAL INSTRUCTIONS
Valve Description:
AERCO P/N:
24-240VAC/24-125VDC, Spring Return Open Valve, 3”
92084-1
24-240VAC/24-125VDC, Dual-actuator, Spring Return Open Valve, 4”
92084-2
24V, Power Open/Power Close Valve, Fail-in-Place, 3”
92084-3
24V, Power Open/Power Close Valve, Fail-in-Place, 4”
92084-4
24V, Power Open/Power Close Valve, w/Electronic Fail-Safe, 3”
92084-5
24V, Power Open/Power Close Valve, w/Electronic Fail-Safe, 4”
92084-6
24V, Power Open/Power Close Valve, w/Electronic Fail-Safe, 6”
92084-7
Revised: 08/02/2012
Belimo
Motorized Valve
Installation
Applies to:
•
All
Benchmark Boilers
•
All
KC1000 Boilers
Description of Document:
This TID provides instructions
for installing and wiring
Belimo motorized valves as
used to isolate an AERCO
Benchmark or KC1000 Boiler
from the system during low
load conditions.
Belimo Motorized Valves
Belimo Motorized Control Valves and AERCO Part Numbers