Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 9)

Preface VII
P
REFACE
This manual is a start-up and programming reference guide for the version 6.4
LiquiFlo
™ drive. The drive can be set up for either volts per hertz (V/Hz) or vector
regulation. This manual provides a start-up procedure for both.
The start-up procedures are followed by reference information. This information
includes a complete list of all parameters and a description of the keypad/display.
• You will need to know how to use the keypad to perform the start-up procedures
described in chapters 1 and 2. If you do not, refer to chapter 3 first.
• For drives that will be set up for V/Hz regulation, go to chapter 1 for the start-up
procedure.
• For drives that will be set up for vector regulation, go to chapter 2 for the start-up
procedure.
• For a description of all the parameters, go to chapter 4.
• For troubleshooting guidelines, go to chapter 5.
• For a description of the drive hardware, refer to the LiquiFlo AC Power Modules
Hardware Reference, Installation, and Troubleshooting instruction manual
(D2-3411).
Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office.
For technical assistance, call 1-800-726-8112. Before calling, please review the
troubleshooting section of this manual and check the standard drives website for
additional information. When you call this number, you will be asked for the drive
model number and this instruction manual number. Also, please have your product
version number ready.