Rockwell Automation Liqui-Flo AC GP Vector Drive Version 6.4 - Manual (Page 16)

1-6 LiquiFlo AC Drive, Software Reference Version 6.4
Step 3.7 Press the ENTER key to display the default setting of P.002.
This displays the default setting for
deceleration time (20.0 seconds).
Step 3.8 Press the ▲
key to increase deceleration time, or the ▼ key to decrease
deceleration time.
The adjustment range is:
1.0 to 999.9 seconds.
VALUE ENTERED:
Step 3.9 Press the ENTER key to save the changed value.
After pressing ENTER, the same
parameter number is displayed. You can
now go to the next parameter.
Step 3.10 Press the ▲
key to display P.003, Minimum Speed.
This parameter sets the minimum speed
in Hz.
20.0
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
p.002
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC
!
ATTENTION:The drive can operate near zero speed. The user is
responsible for ensuring safe conditions for operating personnel by
providing suitable guards, audible or visual alarms, or other devices to
indicate that the drive is operating or may operate near zero speed.
Failure to observe this precaution could result in severe bodily injury or
loss of life.
p.003
Forward
Reverse AUTO
MAN
ENTER
RUN
JOG
PROGRAM
START
STOP
RESET
SPEED
VOLTS
AMPS
Hz
Kw
TORQUE
Password
RUNNING
REMOTE
JOG
AUTO
FORWARD
REVERSE
PROGRAM
RELIANCE
ELECTRIC