Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 67)

Publication 2711-UM014G-EN-P - September 2008 67
Applying Power and Resetting Terminal Chapter 2
Power-up Sequence When resetting or applying power to a PanelView terminal, the
terminal runs a series of self-tests. The initial display shows copyright
information and the status of each self-test number.
See Appendix B for a description of the self-test numbers.
For DH-485 and RS-232 Terminals
•
If an application is loaded, the terminal displays either the
screen that was present prior to reset or power down, or the
startup screen.
•
If an application is not loaded, the Configuration Mode menu
appears.
COPYRIGHT ALLEN-BRADLEY COMPANY
1999, ALL RIGHTS RESERVED VXX.XX
TESTING VERIFICANADO PRUFEN
VERIFICATION AUTOTEST
Self-test Number
2
Function keys do not
appear on touch
screen terminals.
Note: On PV550/600 terminals, the Reset Video is F9.
On PV300 and PV300 Micro terminals, the Reset Video is F2.
PV900 Keypad Terminal