Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 28)

28 Publication 2711-UM014G-EN-P - September 2008
Chapter 1 Terminal Overview
PanelView 300 Terminal Features (back)
DH-485 without RS-232 Port
1
2
3
4
6
5
12 10 9 or 11
7, 8, 9, 10, 11, 12
7 8
DeviceNet with additional RS-232 Port
RS-232 (DH-485 or DF1) without additional RS-232 Port
# Feature Description
1 Nameplate label Provides product information.
2 Sealing gasket Seals the front of the terminal to an enclosure or panel.
3 COMM Status indicator (green) Indicates when communication is occurring.
4 FAULT Status indicator (red) Indicates firmware or hardware faults.
5 Memory card slot Accepts a memory card which stores applications.
6 Power connection terminals Connects to an external 24V DC power source (18…32V DC).
7 DH-485 communication port Connects to an SLC or MicroLogix controller, DH-485 network, or Wallmount Power
Supply (Cat. No. 1747-NP1).
8 DH-485 programming connector Connects to a Personal Computer Interface Converter (Cat. No. 1747-PIC) for
transferring applications. Also connects to an SLC programmer, such as the
Hand-held Terminal (Cat. No. 1747-PT1).
9 RS-232 (DH-485) communication port Connects to the Channel 0 port of an SLC 5/03, SLC 5/04, or SLC 5/05 controller for
point-to-point DH-485 communication. Connects to a MicroLogix controller through
an AIC+ Link Coupler. Also connects to the RS-232 serial port of a computer for
transferring applications.
10 DeviceNet connector Connects to a DeviceNet network.
11 RS-232 (DF1) communication port Connects to a PLC, SLC, or MicroLogix controller with a DF1 port. This port also
connects to the RS-232 port of a computer.
12 RS-232 Printer/File transfer port Connects to a printer (K3A10L1 version only). On a DeviceNet terminal, this port also
connects to the RS-232 port of a computer for transferring applications.