Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 222)

222 Publication 2711-UM014G-EN-P - September 2008
Chapter 12 Terminal Connections
PanelBuilder32 Software
Supports the direct transfer of application files from PanelBuilder32
using an RS-232 link.
Windows PanelView File Transfer (WinPFT) Utility
Supports the direct transfer of PanelBuilder32 application files from
WinPFT over an RS-232 link. The WinPFT utility is included with the
PanelBuilder32 Software. RSLinx software may be required to transfer
applications to the terminal for DH-485 and DF1 protocols.
This method is recommended for direct downloads to installed
PanelView 300 Micro terminals using a portable or laptop computer.
Windows CE Pocket PanelView File Transfer (PocketPFT) Utility
Supports the direct transfer of PanelBuilder32 application files from
the PocketPFT software over an RS-232 link. The PocketPFT software
and an RS232 cable is available from Rockwell Software as part of the
MaintenCE suite of tools. You will also need one of the recommended
download cables.
This method is recommended for direct downloads to installed
PanelView 300 Micro terminals using an HPC JORNADA portable CE
computer, available only from Rockwell Software.
IMPORTANT
After a successful download of an application, you may not be
able to download another application. The downloaded
application may have different communication settings than the
settings in PanelBuilder32 software. Either change the terminal
settings using the Communication Setup screen (see page 72)
or the Application settings dialog in PanelBuilder 32 software.