Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 269)

Publication 2711-UM014G-EN-P - September 2008 269
Appendix
C
European Union Directive Compliance
If the PanelView Operator Terminals are installed within the European
Union or EEA regions and have the CE mark, the following
regulations apply.
EMC and Low Voltage Directives
These apparatuses are tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC), and amending directives
92/31/EEC, 93/68/EEC; 73/23/EEC Low Voltage Directive, and
amending directive 93/68/EEC using the following standards, in whole
or in part:
300
Micro 300 550 600 900M 900C 1000G 1000C 1400
Emissions (Class A: Industrial)
EN50081-2:1993 x x x x x x x x x
Immunity (Industrial) EN61000-6-2:1999 x
x
(1)
x
(1)
x
(1)
x
(1)
x
(1)
x
(1)
x
(1)
x
(1)
Immunity (Industrial) EN50082-2:1995
(2) x x x x x x x x
Programmable Controllers Equipment
Requirements and Tests) EN61131 2:1995 x x x x x x x x
Low Voltage Directive (Safety Sections of
EN61131-2) x x x x x x x
(1) Meets standard as of April 2002.
(2)
This standard applies to products manufactured prior to April 2002.