Rockwell Automation 5370 CVIM Communications Manual - Manual (Page 109)

Chapter 5
Using the RS-232 Ports
5–39
The read results command can be executed more than once per command by
specifying an n times value. This command is toolset dependent. Toolset 1
is specified by 04. Toolset 2 is specified by 05.
Examples:
07 00 01 18 01
Operation Count Object
04
This command reads the results of toolset 1, reference line #1 (4 data bytes
returned)
07 00 01 17
Operation Count Object
0B 05
This command reads the results of toolset 2, window #11 (4 data bytes
returned).
07 00 01 16
Operation Count Object
15 04
This command reads the results of toolset 1, gage #21 (4 data bytes
returned).
07 00 01 1A
Operation Count Object
04
This command reads the results of toolset 1, light probe (4 data bytes
returned).
07 00 01 04
Operation Count Object
This command reads the results of toolset 1, light probe (4 data bytes
returned).