Rockwell Automation 25B PowerFlex 525 Embedded EtherNet/IP Adapter - Manual (Page 3)

Rockwell Automation Publication 520COM-UM001B-EN-E - March 2013 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Parameter Groups N and M added. 24
Configuring a Master-Slave Hierarchy updated. 31
Enabling Datalinks to Write Data updated. 32
Enabling Datalinks to Read Data updated. 32
Changing the Fault Action table updated. 33
Setting the Fault Configuration Parameters table updated. 33
Description of Drive Rating setting of the Module Definition window updated. 43
Tip for Using ADC with RSLogix 5000/Logix Designer updated. 49
Version of RSLogix 5000 for use with drive generic profile updated. 55
Settings for Connection Parameters table updated. 56
Input Image Controller Tag graphic updated. 58
Output Image Controller Tag graphic updated. 58
I/O Image for PowerFlex 525 Drives table updated. 62
CompactLogix Controller for Drive Generic Profile Ladder Logic Program Example
graphic updated. 66
CompactLogix Example Ladder Logic Program Using a Drive Generic Profile for
Logic Command/Reference diagram updated. 68
Important table for CompactLogix Examples updated. 71
Example Ladder Logic to Read a Single Parameter diagram updated. 71
Fifth footnote of Scattered Read Message Configuration Screens updated. 76
Tag Tab entry for Scattered Write Multiple Messages Configuration Screens table
updated. 78
Drive 0 Control Routine diagram updated. 102
Extra table under Instances for Identity Object removed. 126
Description of Device Type entry in Instances Attribute table for Identity Object
updated. 127
Instance Attribute table for Parameter Object updated. 133
Instances table for DPI Device Object updated. 138
Instances table for DPI Parameter Object updated. 141
Instances table for DPI Fault Object updated. 147