Lenze EMF2175IB - Manual (Page 60)

CANopen
6 Parameter setting
6-32
L
BA2175 EN 2.0
6.4.1.7 100A
hex
: Manufacturer’s software version
Controller and module software version
Index [hex] Subindex Name Data type Authorisation
100A 0 Manufacturer software version Vis. string
{11 characters}
const
6.4.1.8 100C
hex
: Guard time
Monitoring time
Index [hex] Subindex Name Data type Authorisation
100C 0 Guard time U16 rw
The guard time is indicated in [ms].
If guarding is not to be supported, the default setting of 0 should not be changed.
6.4.1.9 100D
hex
: Life time factor
Index [hex] Subindex [hex] Name Data type Authorisation
100D 0 Life time factor U8 rw
If the guarding function, which results from guard time and life time factor, is not to be supported,
the default setting of 0 should not be changed. For further information see chapter 6.1.2.1.
6.4.1.10 1010
hex
: Store parameters
Parameter storage in the EEPROM.
Index [hex] Subindex Name Data type Authorisation
1010 0 Store parameters U32 ro/rw 1010
1 ... 3*
Store parameters U32 ro/rw
The subindexes 1, 2 and 3 are presently not supported.
Parameter storage
Error messages occur when
•
storage is incorrect (in bytes 5 ...8): 0606 0000
hex
•
the signature is wrong: 0800 0020
hex
Tip!
For module parameter storing, the signature “ save” must be in the telegram data.
Assignment of telegram data words for parameter storing
Signature MSB LSB
ISO 8859 (ASCII) e v a s
hex 65 76 61 73
Bit assignment for reading right
U32
0 1 2 - 31
0/1 0/1 0 0 0 .. 0 0 0
Show/Hide Bookmarks