beautypg.com

Devicenet, 5 features of the “ thin” cable, 10 installation – Lenze EMF2175IB User Manual

Page 105

background image

DeviceNet

10

Installation

10-7

L

BA2175 EN 2.0

10.5

Features of the “ thin” cable

(according to DeviceNet Specification)

General features

Two shielded pairs

Common axis with drain wire in center.

General features

Total shielding

65% coverage
36 AWG or 0.12mm Cu braid (individually tinned)

Drain wire

#22 copper min.; 19 AWG min. (individually tinned)

Outside diameter

6.096 mm (min) to 7.112 mm (max.) roundness - radius delta to be within 20% of 0.5
O.D.

Jacket marking

Vendor name & part # and additional markings

DCR (braid+tape+drain)

10.5 Ohm/1000 m (nom. @ 20ºC)

General features

Specification

Certifications (U.S. and Canada)

NEC (UL) type CL2(min.)

Bend readius installation / fixed

20 x diameter / 7 x diameter

Oprating ambient temperature

-20 to +70ºC @ 1,5 Ampere; de-rate current linearly to zero @ 80ºC

Storage temperature

-40 to +85ºC

Pull tension

289.23 N. max.

Features of the

Insulation diameter

1.96 mm (nominal)

Features of the
data cable

Conductor pair size

#24 copper (minimum); 19 AWG min (individually tinned)

data cable

Colours

libht blue blue, white

Pair twist / m

approx. 16

Tape shield over pair

1 mil / 1 mil, Al / Mylar. Al side out
w/shorting fold (pull-on applied)

Impedance

120 Ohm +/- 10% (at 1 MHz)

Propagation delay

4.46 ns/m (maximum)

Capacitance between conductors

39.37 pF / m at 1 kHz (nominal)

Capacitance between a conductor and the
conductor connected to shield.

78.74 pF / m at 1 kHz (nominal)

Capacitive unbalance

3.94 pF/1000 m at 1 kHz (maximum)

DCR - @ 20ºC

91.86 Ohm/1000 m (maximum)

Attenuation:

0.95 dB/100 m @ 125 kHz (maximum)
1.64 dB/100 m @ 500 kHz (maximum)
2.30 dB/100 m @1.00MHz (maximum)

Features of the

Conductor pair size

#22 copper (Minimum); 19 AWG Minimum (individually tinned)

Features of the
voltage cable

Insulation diameter

1.4 mm (nominal)

voltage cable

Colours

Red
Black

Pair twist/m

approx. 16

Tape shield over pair

1 mil / 1 mil, Al / Mylar. Al side out
w/shorting fold (pull-on applied)

DCR - @ 20ºC

57.41 Ohm/1000 m (maximum)

Show/Hide Bookmarks