Lenze EMF2175IB - Manual (Page 2)

These Operating Instructions are valid for fieldbus modules with the following nameplates:
2175IB Vx. 0x
In connection with the unit series as from nameplate data:
820X E. 2x. 1x. (8201 - 8204)
820X E./C. 2x. 1x. Vxxx (8201 - 8204)
821X E. 2x. 2x. (8211 - 8218)
821X E./C. 2x. 2x. Vxxx (8211 - 8218)
822X E. 1x. 1x. (8221 - 8225)
822X E. 1x. 1x. Vxxx (8221 - 8227)
824X E. 1x. 1x. (8241 - 8246)
824X E./C. 1x. 1x. Vxxx (8241 - 8246)
82EVxxxxxBxxxXX Vx 1x 8200 vector
82CVxxxxxBxxxXX Vx 1x 8200 vector, cold plate
93XX E./C. 2x 1x (9321 - 9332)
93XX Ex 2x 1x (Servo PLC 9300)
Important:
These Operating Instructions are only valid together with the corresponding Instructions for
82XX, 82XX; 8200 vector, 93XX and 9300 Servo PLC controllers. C
What is new / what has been changed ?
Material no. Edition Important Contents
423117 2.0 07/01 TD02 1st edition
E 2001 Lenze GmbH & Co KG
No part of this documentation may be copied or made available to third parties without the explicit written approval of Lenze GmbH & Co KG.
All information given in this online documentation has been carefully selected and tested for compliance with the hardware and software described. Neverthe-
less, discrepancies cannot be ruled out. We do not accept any responsibility or liability for any damage that may occur. Required corrections will be included
in updates of this documentation.
Show/Hide Bookmarks