Allied Telesis AT-S41 - Manual (Page 99)

AT-S41 User’s Guide
99
5. Enter the port number whose PVID you want to change.
A prompt similar to the following is displayed:
Enter PVID for port 1>
6. Enter the new PVID for the port.
Once a new PVID has been assigned to a port, the port is an untagged
member of that VLAN and only that VLAN.
If the port is also an tagged member of any VLANs, it remains as a
tagged member of those VLANs.
7. Repeat Steps 3 to 6 to assign new PVIDs to any other ports that are to
be untagged members of the new VLAN.
8. Once you have changed all of the appropriate PVIDs, type Q to select
Quit to Previous Menu.
The VLAN Management Menu in Figure 24 on page 95 is displayed
again.
This completes the procedure for creating a new VLAN.