Allied Telesis AT-S41 - Manual (Page 62)

AT-S41 User’s Guide
62
Configuring Port Security
To set a port’s security level, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type P to select Port
Security Configuration.
The Port Security Configuration Menu is displayed in Figure 16.
Figure 16 Port Security Configuration Menu
3. Type I to choose Select Stack ID and enter the Stack ID number of the
switch in the stack on which you want to configure port security. The
master switch is selected by default.
4. Type S to select Set Secure Level.
5. At the prompt, enter the port number whose security you want to set.
Press Enter.
The following prompt is displayed:
Limited or Secure port N >
L for Limited; S for Secure; N for Normal
AT-8350GB Local Management System
Advanced Switch Configuration -> Port Security Configuration Menu
Stack ID: 1
Port Secure Level Threshold Intrusion Detection Status
---- -------------- ------------ -------------------------------
1 Normal ----- -----
2 Normal ----- -----
3 Normal ----- -----
4 Normal ----- -----
5 Normal ----- -----
6 Normal ----- -----
7 Normal ----- -----
8 Normal ----- -----
9 Normal ----- -----
10 Normal ----- -----
11 Normal ----- -----
12 Normal ----- -----
---------------------------- ------------------------------
[N]ext Page [S]et Secure Level Set [T]hreshold
[P]revious Page Select Stack [I]D Set Intrusion[D]etection
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option