Uploading a configuration file using xmodem – Allied Telesis AT-S41 User Manual
Page 135
AT-S41 User’s Guide
135
Uploading a Configuration File Using XModem
This section contains the procedure for uploading a configuration file
from a switch using XModem in a local management session. The
procedure takes approximately 7 to 10 minutes to complete.
Note
You cannot perform this procedure from a Telnet or Web browser
management session.
Caution
The switch will not forward Ethernet traffic during the configuration
upload/download process.
To upload/download a configuration file on an AT-8350GB switch,
perform the following procedure:
1. From the Main Menu, type T to select Switch Tools.
2. From the Switch Tools Configuration Menu, type C to select
Configuration File Upload/Download.
The Configuration File Upload/Download Menu is displayed in
Figure 36.
Figure 36 Configuration File Upload/Download Menu
3. From the Configuration File Upload/Download Menu, type X for
XModem Configuration File Upload/Download.
AT-8350GB Local Management System
Switch Tools Configuration -> Configuration File
Upload/Download Menu
[T]FTP Configuration File Upload/Download
[X]Modem Configuration File Upload/Download
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option