Allied Telesis AT-S41 - Manual (Page 199)

AT-S41 User’s Guide
199
Phase 1 This phase allows you to assign a VID and a name to your VLAN and also
designate the VLAN port members.
1. Click on the Advanced Config menu tab and select VLAN Config from
the sub-menu. Select Create VLAN from the next sub-menu.
The Create/Modify VLAN page will appear, as displayed in Figure
77.
Figure 77 Create/Modify VLAN
2. Enter a VLAN ID in the VLAN ID field.
If this VLAN will be unique in your network, then its VID must also be
unique from all other VIDs in the network.
If this VLAN will be part of a larger VLAN that spans multiple stacks,
then the VID value for the VLAN should be the same on each stack. For
example, if you are creating a VLAN called Sales that will span three
stacks, you must assign the Sales VLAN on each stack the same VID
value.
The VLAN ID must be a value between 2 and 4094.
3. You may enter a name for the VLAN in the VLAN Name field.
The name should reflect the function of the end nodes that will be a
part of the VLAN (for example, Sales or Accounting). The name can
include spaces but not special characters, such as asterisks (*) or
exclamation points (!). The VLAN name can contain up to 32
characters.