Allied Telesis AT-S41 - Manual (Page 136)

AT-S41 User’s Guide
136
The XModem Configuration File Upload/Download Menu is
displayed in Figure 37.
Figure 37 XModem Configuration File Upload/Download Menu
4. Type U to select Upload Configuration File.
The following prompt is displayed:
Upload config file (Y/N)>
5. To continue with the procedure, type Y for Yes. To cancel the
procedure, type N for No.
If you continue, go to the next step to complete the procedure.
6. Begin the file upload.
Note
The following steps show how you would transfer the file using the
Hilgraeve HyperTerminal program.
7. From the local management window, select Transfer from the
HyperTerminal menu. Then select Receive File from the pull-down
menu.
The HyperTerminal Menu is displayed in Figure 38.
Figure 38 HyperTerminal Menu
AT-8350GB Local Management System
Configuration File Upload/Download -> XModem Configuration
File Upload/Download
Baud Rate : 9600bps
---------------------- ------------------------
[U]pload Configuration File
[D]ownload Configuration File
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option