Allied Telesis AT-S41 - Manual (Page 151)

AT-S41 User’s Guide
151
Figure 53 TFTP Software Upgrade Menu
You will need to provide the following information when using the
TFTP client software to download the AT-S41 software image. The
options on the menu are defined below.
Set TFTP [S]erver IP Address
This is the IP address of the server from which you are downloading
the new software.
Set Image [F]ile Name
The path and filename of the software that is to be downloaded onto
the switch. The filename of the software should be “ATS41.img”. If
necessary, change the filename of the image.
[U]pgrade Image and Reboot
Upgrades the new image to your switch and reboots the switch.
Set [R]etry Count
The amount of times your system will try to download the image
using FTP. The Set Retry Count range is 1 - 20. The default setting is 5.
4. Open the TFTP client software and select the current directory where
the software image is located.
5. Return to the local management software upgrade menu as
displayed in Figure 53.
6. Type U to select Upgrade Image and Reboot.
The following prompt is displayed:
Download file (Y/N)>
7. Type Y to select Yes.
The software immediately begins to download onto the switch’s
CPU. This process will take seconds to complete.
Once the new software download process has completed, the
switch begins to initialize the software. This process takes a few
minutes. Once the initialization process is complete, the switch
will automatically reboot.