Allied Telesis AT-S41 - Manual (Page 126)

AT-S41 User’s Guide
126
Viewing Group Members
You can use the AT-S41 software to display a list of the members of each
multicast group on a switch. To display the list, perform the following
procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type I to select the
IGMP Snooping Configuration.
3. From the IGMP Configuration Menu, type V to select View Group
Members.
The following prompt is displayed:
Enter VLAN ID>
4. Enter the VLAN ID for the VLAN this multicast group belongs to.
The following prompt is displayed:
Enter IP address>
5. Enter the IP address of the of the multicast group whose members
you want to see.
The Group Members are displayed on the IGMP Configuration
Menu, as shown in Figure 33.
Figure 33 View Group Members Menu
The information on this menu is for viewing purposes only. The
columns are defined below:
Multicast Group Address
The multicast address of the group.
AT-8350GB Local Management System
Enter the character in square brackets to select option
IGMP Configuration Menu -> View Group Members Menu
VLAN ID: 3 Multicast group address: 224.0.1.22
Group members
-------------------------------------------------------------
3
--------------------------- ------------------------
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option