Allied Telesis AT-S41 - Manual (Page 103)

AT-S41 User’s Guide
103
This menu lists the ports on the switch and each port’s current PVID
assignment. For example, referring to the figure above, Ports 1 to 8 on
the switch all have a PVID of 1, meaning that they are untagged
members of the Default VLAN, which has a VID of 1.
The menu, when initially displayed, lists the PVIDs for the ports on the
master switch of the stack.
4. Type I to choose Select Stack ID and enter the number of a switch in
the stack containing a port whose PVID you need to change if it is on
a slave switch.
The VLAN Port Configuration Menu for the selected switch is
displayed.
5. To set a PVID, type V to select the Set Port VID option.
The following prompt is displayed:
Set PVID->Enter port number>
6. Enter the port number whose PVID you want to change.
A prompt similar to the following is displayed:
Enter PVID for port 1>
7. Enter the new PVID for the port.
Once a new PVID has been assigned to a port, the port is an untagged
member of that VLAN and only that VLAN.
If the port is also an tagged member of any VLANs, it remains as a
tagged member of those VLANs.
8. Repeat Steps 3 to 6 to assign new PVIDs to any other ports that are to
be untagged members of the new VLAN.
9. Once you have changed all of the appropriate PVIDs, type Q to select
Quit to Previous Menu.
The VLAN Management Menu in Figure 24 on page 95 is displayed
again.
This completes the procedure for modifying a VLAN.