Allied Telesis AT-S41 - Manual (Page 150)

AT-S41 User’s Guide
150
Downloading a New Management Software Image Using TFTP
TFTP software is available from various sources and is included in SNMP
which can be purchased through Allied Telesyn. A command line version
is included in most UNIX variants and in Windows NT. Please consult the
documentation or the manufacturer of the software used on the proper
use of the software.
You will need to provide the following information when using TFTP
client software to download the AT-S41 software image:
❑ TFTP Server IP Address
❑ Image File Name
This procedure assumes that you have already obtained a copy of TFTP
software and have stored it on the computer from which you will be
performing this procedure.
To download the new AT-S41 software image onto your AT-8350GB
switch, perform the following procedure:
1. From the Main Menu, type T to select Switch Tools.
2. From the Switch Tools Configuration Menu, type U to select Software
Upgrade.
3. From the Software Upgrade Menu, type T for TFTP Software Upgrade.
The TFTP Software Upgrade Menu is displayed in Figure 53.
AT-8350GB Local Management System
Main Menu -> Software Upgrade Menu
Image Version/Date: 1.00F/Jan 15 2002 19:40:11
TFTP Server IP: 0.0.0.0
Image File Name:
Retry Count: 5
-------------------------------- ----------------
Set TFTP [S]erver IP Address
Set Image [F]ile Name
[U]pgrade Image and Reboot
Set [R]etry Count
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option