Allied Telesis AT-S41 - Manual (Page 147)

AT-S41 User’s Guide
147
Downloading New Management Software Using XModem
This section contains the procedure for downloading a new version of
AT-S41 management software onto a switch from a local management
session. The procedure takes approximately 7 to 10 minutes to
complete.
Note
You cannot perform this procedure from a Telnet or Web browser
management session.
Caution
The switch will not forward Ethernet traffic during the software
download and initialization process.
Note
The current configuration of the switch (e.g., IP address, subnet
mask, and virtual LANs) is maintained when you install a new
software image on the switch. To return a switch to its default
configuration, refer to Activating the Management Software’s
Default Values on page 46.
This procedure assumes that you have already obtained the new version
of management software and have stored it on the computer from
which you will be performing this procedure.
To download a new software onto an AT-8350GB switch, perform the
following procedure:
1. From the Main Menu, type T to select Switch Tools.
2. From the Switch Tools Configuration Menu, type U to select Software
Upgrade.
3. From the Software Upgrade Menu, type X for XModem Software
Upgrade.