Allied Telesis AT-S41 - Manual (Page 214)

AT-S41 User’s Guide
214
2. Enter the VLAN ID whose static and dynamic MAC addresses you want
to view into the VLAN ID field.
3. Click the Apply button next to the VLAN ID field.
The management software displays the MAC addresses of the
nodes of all ports in the VLAN.
4. To modify the aging time, enter a value in seconds in the Aging Time
field and click the Apply button. The Aging setting is in range of 10 to
1048 seconds. The default setting is 300 seconds.
The management software immediately activates the new aging
time value on all ports of the switch.