Allied Telesis AT-S41 - Manual (Page 142)

AT-S41 User’s Guide
142
Uploading/Downloading a Configuration File Using TFTP
TFTP software is available from various sources and is included in SNMP
which can be purchased through Allied Telesyn. A command line version
is included in most UNIX variants and in Windows NT. Please consult the
documentation or the manufacturer of the software used on the proper
use of the software.
You will need to provide the following information when using TFTP
client software to upload/download configuration files:
❑ TFTP Server IP Address
❑ Configuration File Name
This procedure assumes that you have already obtained a copy of TFTP
software and have stored it on the computer from which you will be
performing this procedure. Refer to the TFTP software instructions on
how to upload and download files in specific directories on your server
or computer.
To upload or download a configuration file on your AT-8350GB switch,
perform the following procedure:
1. From the Main Menu, type T to select Switch Tools.
2. From the Switch Tools Configuration Menu, type C to select
Configuration File Upload/Download.
The Configuration File Upload/Download Menu is displayed in
Figure 47.
Figure 47 Configuration File Upload/Download Menu
3. From the Configuration File Upload/Download Menu, type T for TFTP
Configuration File Upload/Download.
AT-8350GB Local Management System
Switch Tools Configuration -> Configuration File
Upload/Download Menu
[T]FTP Configuration File Upload/Download
[X]Modem Configuration File Upload/Download
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option