Allied Telesis AT-S41 - Manual (Page 76)

AT-S41 User’s Guide
76
Enabling Port Monitoring
To enable port monitoring, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type M to select Port
Monitoring Configuration.
The Port Monitoring Configuration Menu is displayed in Figure 21.
Figure 21 Port Monitoring Configuration Menu
3. Type S to select Set Monitoring Port.
The following prompt is displayed:
Set monitoring port->Enter port number>
4. Enter the number of the port you want to function as the monitoring
port. The default monitoring port is Port 2. You can specify only one
monitor port. Press Enter.
Note
For a switch stack, you will be prompted to enter the Stack ID before
entering the port number.
The port number you have just entered is displayed under the
Monitoring Port heading on the Port Monitoring Configuration
Menu.
AT-8350GB Local Management System
Advanced Switch Configuration -> Port Monitoring Configuration Menu
Stack ID Monitoring Port Stack ID Monitored Port Status
--------- --------------- ----------- -------------- -----------
1
3 1 8 Enabled
-------------------------------- -------------------------
[S]et Monitoring Port
Set [M]onitored Port
[E]nable/Disable Port Monitoring
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option