Allied Telesis AT-S41 - Manual (Page 45)

AT-S41 User’s Guide
45
Rebooting a Switch
To reboot a switch, perform the following procedure:
1. From the Main Menu, type T to select Switch Tools.
2. From the Switch Tools Configuration Menu, type R to select System
Reboot.
The System Reboot Menu is displayed in Figure 8.
Figure 8 System Reboot Menu
3. Examine the Reboot Type field on the menu. If it does not state
Normal, perform Steps 4 - 7.
4. From the System Reboot Menu, type O to select Set Reboot Option.
The following prompt is displayed:
Select reboot option (F/I/N)
5. Type N for Normal.
6. Type R to Start Reboot Process.
The following prompt is displayed:
Are you sure you want to reboot the system (Y/N) ->
7. Type Y for yes or N for no.
The stack immediately reloads its operating system. This process
will take a few minutes.
Caution
The stack will not forward traffic during the brief period required to
reload its operating software. Some data traffic may be lost.
AT-8350GB Local Management System
Main Menu -> System Reboot Menu
Reboot Status: Stop
Reboot Type: Normal
------------------------- ---------------------
Set Reboot [O]ption
Start [R]eboot Process
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option